Survive By Quality, Development By Credit, Efficiency By Management
Looking to get the industrial look for less? A perfect complement to a rustic farm table, Camilla of Something Is Done created this cool chandelier made from pipes. See how she did it:
Skill Level: Moderate
Time Required: 2 hours
Project Cost: $70, not including wiring
What You Need
- Steel pipe parts and fittings:A) Nipple, 1-1/2 x 2" (1)B) Floor flange, 1-1/2" (1)C) Reducer, 1-1/2 x 1/2" (7)D) Tee, 1/2" (9)E) Square head plug, 1/2" (4)F) Nipple, 1/2 x 7" (4)G) Nipple, 1/2 x 6" (2)H) Nipple, 1/2 x 3" (2)I) Nipple, 1/2 x 1-1/2" (6)J) Pipe,1/2 x 24" (1)
- Ceramic ceiling fan light sockets (6)
- Mineral spirits + rags
- Rubber foam weather strips
- Clear spray lacquer (1 can)
- Black spray paint (1 can)
1. Use mineral spirits and rags to wipe the protective oil off all the steel pipe parts.
2. Screw together the light fixture using the diagram above as a reference. "Nipples" refer to short threaded sections of pipe. Parts F, G, F (in that order) form the long arms on each side of the chandelier. Two H pieces form the crossbar perpendicular to the two long arms. (Note: If you can't tell, the two long arms are staggered in Camille's configuration, making the chandelier asymmetrical.)
3. Spray paint the ceramic light sockets black.
4. Spray the entire fixture with spray lacquer to protect it from rust.
5. Wire the lamp. If you want to DIY this step, check out our post on how to make a lamp out of almost anything, or Kara Paslay's chandelier-specific tutorial. If you are at all uncomfortable, consider hiring an electrician!
6. After the light sockets are wired, wedge them into their places using strips of rubber weather stripping (this will allow you to remove the sockets if needed).
- No.611, Langda Road, Shengfang Town, Bazhou City, Hebei Province, China (FACTORY) Room 3-5-101, Tianjin Yuan, Machang Road, Hexi District, Tianjin, China (Tianjin Office)